ADHESIVES

NuFlex® 620 AL Sausage Gun is designed for large volume applications using 591 mL foil sausages. Made from high-quality steel, it will provide years of trouble-free service.

Holland Imports 13" Caulking Gun C001515 is designed in a skeleton style for ease of use. This caulking gun features a smooth rod and a revolving handle, allowing for efficient application of caulk. Additionally, it includes a built-in seal punch located on the handle for added convenience.

Pintar Caulking Gun 6003 features a skeleton type design with a smooth rod for easy application. It has a powder coated finish with a revolving handle for smooth operation. The built-in seal punch on the handle makes it convenient to use. This caulking gun measures 9 inches in length and is perfect for any DIY project, this caulking gun is a must-have tool for any home improvement enthusiast.

3M™ Fastbond™ Contact Adhesive 30 is a low-odour, water-based adhesive designed to have high strength, high coverage, a long bonding range, and good heat resistance. It has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.

3M™ Neoprene High Performance Contact Adhesive 1357 is an industrial solvent-based adhesive. It offers high immediate handling strength and good heat resistance, and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination. Can be used to bond most rubber, cloth, metal, wood, foamed glass, paper honeycomb, decorative plastic laminates, and many other substrates.

3M™ Neoprene Contact Adhesive 10 is a versatile, solvent-based adhesive. It offers good heat resistance, and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination. It provides excellent heat and water resistance, performing in temperatures up to 300°F (148°C). This product dries quickly while allowing time for positioning and adjustments without slowing down work processes. It is an air drying contact adhesive that bonds immediately and permanently upon application of contact pressure. It bonds many decorative and high pressure laminates, plastic, aluminum, steel, particle board, wood, masonry, rubber, and canvas.

3M™ Cylinder Adhesive Applicator - Standard Output for use with any 3M™ Cylinder Spray Adhesive products. This is the recommended applicator for most cylinder spray adhesives where normal output rates are desired.

ASI DS Manual Dispensing Gun DS99490 is a manual applicator designed for use with 490 ml cartridges. It operates with a 10:1 mixing ratio, making it suitable for various applications that require precise dispensing.

ASI DS Manual Dispensing Gun DS99500 KA is a manual applicator designed for precise dispensing, featuring a capacity of 50 ml. It is available in two mixing ratios: 1:1 and 10L1, catering to various application needs.

LOCTITE® EA 9017 (known as FIXMASTER® FAST CURE POXY PAK™ EPOXY) is a 2-part, room temperature curing epoxy adhesive used for high strength, permanent bonding of metals, ceramics, concrete, wood, glass and most plastics. This product can withstand temperatures up to +300°F (+149°C).

LOCTITE® EA 0151 is a general purpose, ultra clear, thixotropic, epoxy paste adhesive for bonding glass, metals, circuit boards, fibre optics, and many plastics. It is easy to mix, and its 50-minute work-life allows for extended adjustment time. Cure is room temperature or heat.

LOCTITE® UK U-05FL is an off-white, 2-part, medium-viscosity, industrial grade, polyisocyanate urethane adhesive. It cures at room temperature to form a highly flexible bond line, providing excellent peel and shear strength. Ideal for bonding a variety of metals, plastics, glass, wood and more, it can also be used for potting and encapsulating strain and heat sensitive electronic components.

LOCTITE® EA E-90FL is a grey, opaque, 2-part, toughened, medium viscosity, industrial grade solid epoxy adhesive. After curing at room temperature, it forms a flexible, grey bondline with excellent resistance to shock and impact, a wide range of chemicals and solvents and acts as an excellent electrical insulator. Suited for low-stress, high-impact bonding applications of dissimilar materials.

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD-1.5 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 1-1/2” (38.1 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD2 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to two inches (50.8 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD3 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 3 inches (76.2 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD4 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS Material. Can be used to firestop up to four inches (101.6 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

UltraSeal® PF-10 Foam Cleaner is a cleaning solvent used to dissolve any uncured foam and adhesive foam from unwanted places. Uniquely designed for use with the Nuco dispensing guns. Designed for cleaning foam from clothing, tools, construction surfaces and other general cleaning purposes.

Evans 50102 Thermocol 102 is a hot melt glue stick commonly used for gluing porcelain and ceramic, toys, plastics, packing materials, wood and bamboo products, lamps and lanterns.

Dural M-259 Hot Melt Adhesive is a specialized low-temperature adhesive based on EVA, designed primarily for sealing cases and cartons, as well as various general bonding tasks. Its formulation ensures efficient processing, providing excellent machinability and reliable performance across diverse packaging applications.

Dural M-225 is a fast setting hot melt adhesive for case and carton sealing. It was designed for wrap around case sealers, which it is suitable for because of its superior hot tack and fast set speed. It can be used for clay coated board. Formulated as a general purpose product for packaging operations. Its water white colour makes it a natural choice for food & beverage related applications.

3M™ Scotch-Weld™ Hot Melt Applicator Tips offer versatility when dispensing hot melt adhesives. Uniquely designed for our 3M™ Scotch-Weld™ Hot Melt Applicators, these tips can help maximize the use of our hot melt adhesives by improving productivity, optimizing precision, and reducing waste in your assembly process. Its fluted metal tip designed as a replacement for standard nozzles [9/100 in (0.23 cm)] on most 3M™ Scotch-Weld™ Hot Melt Applicators.

LOCTITE® 411 is a water white to slight cloudy, high-viscosity, ethyl cyanoacrylate adhesive gel. This general purpose, gap-filling instant adhesive is suitable for bonding rubbers, plastics, and metals. It exhibits excellent peel strength and added-heat resistance. Fixture time occurs in seconds, with full cure achieved in 24 hr at normal room humidity.

LOCTITE® 4011 is a low viscosity, ethyl-based instant adhesive for the assembly of difficult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. This ISO 10993 certified product is well suited to porous or absorbent materials such as wood, paper, leather and fabric, although it can also bond plastics, rubbers and metals.