3M

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

3M™ Air and Vapour Barrier Through Wall Flashing Tape 3015TWF is a very tough and resilient flashing membrane, designed to stick to a wide range of building materials without the use of primers. The self-adhering membrane can be applied in temperatures ranging from -18°C to 66°C (0°F to 150°F), and is UV resistant for up to 24 months, making it ideal for both short-term and long-running construction projects. These increased temperature ranges can reduce or eliminate cold-weather related delays, extending the construction season in cold climates and enabling year-round construction in moderate zones.

3M™ Safety-Walk™ Slip-Resistant Conformable Tapes and Treads 510 are ideal for use on diamond grade safety plates, steps and other irregular surfaces. Contours to surfaces in light to heavy shoe-traffic areas. These tapes and treads are made of a high-friction, mineral-coated, slip-resistant material with a special, pressure-sensitive, adhesive-backed aluminum film that is designed to conform around corners and adhere to irregular surfaces.

3M™ Safety-Walk™ Slip-Resistant General Purpose Tapes and Treads 610 use a mineral coating to create a highly durable, slip-resistant surface. Its low-profile design helps reduce tripping on a variety of surfaces, including high-traffic areas like stairways, entrances, and ramps. The National Floor Safety Institute (NFSI) certified this material as "High-Traction" thanks to its static coefficient of friction (SCOF) being greater than 0.60. According to the NFSI, this rating means that floor surfaces maintaining this level of slip resistance when wet can reduce slip and fall claims by up to 50%–90% — providing a safer traversal experience.

3M™ Heavy Duty Spray Adhesive 20 is an economical, versatile, fast-drying spray adhesive that bonds a range of lightweight materials. This spray adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. Capable of forming bonds on a wide array of materials, including paper, cardboard, fabric and insulation. It also works well with plastic, metal, wood and much more.

3M™ Hi-Strength Spray Adhesive 90 is a high strength, fast contact-type adhesive. It has fast contact strength build-up for many decorative laminates. This spray adhesive is ideal for applications that require spraying down. Creates a high strength fast tack bond to concrete, wood, MDF, laminates, or polyethylene. It has excellent moisture resistance.

3M™ HoldFast Spray Adhesive 70 is an extremely versatile, fast-tacking industrial grade spray adhesive with a unique wide-web spray pattern well suited for bonding a variety of construction materials. It requires a short dry time yet provides long open time to perfectly position your materials. It is an effective adhesive for waterproofing and protecting from moisture. Helps to create a quick, permanent bond on many substrates, including polystyrene, drainboard, insulation, foams, and fabrics. It is typically used in construction, specialty vehicle, RV, manufactured housing, and HVAC. It is packaged in a pre pressurized canister for an easy to use, maintenance free delivery system.

3M™ Multi-Purpose Spray Adhesive 27 is a versatile, economical, industrial grade, mist spray aerosol adhesive. Features an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to find the best fit for your parts. Capable of forming strong bonds on a wide array of materials, including paper, cardboard, fabric and insulation. It also works well with plastic, metal, wood and much more.

3M™ Multi-Purpose Spray Adhesive Super 77™ is a high-tack, high-coverage and fast drying adhesive. It is fast drying adhesive that bonds quickly within 15 seconds and offers high coverage and low soak in for long lasting bond. The spray is great for permanently attaching foils, carpeting, lightweight foams, paper, cardboard, felt, and cloth to painted or unpainted metals, wood, and hardboard. Bonds lightweight materials.

3M™ Scotch-Weld™ Hi-Strength Postforming Cylinder Spray Adhesive 94 CA is a strong adhesive that bonds a range of large surfaces and is perfect for large-scale laminations. This adhesive formula is easy to dispense and apply directly onto surfaces. Extended tack allows for longer bonding range. Bonds to a variety of demanding substrates like decorative laminate, metal, and some rubbers. It is typically used in woodworking and specialty vehicle applications, especially where VOC's are a concern.

3M™ Scotch-Weld™ Hi-Strength Postforming Cylinder Spray Adhesive 94 CA is a strong adhesive that bonds a range of large surfaces and is perfect for large-scale laminations. This adhesive formula is easy to dispense and apply directly onto surfaces. Extended tack allows for longer bonding range. Bonds to a variety of demanding substrates like decorative laminate, metal, and some rubbers. It is typically used in woodworking and specialty vehicle applications, especially where VOC's are a concern.

3M™ Polystyrene Insulation Cylinder Spray Adhesive 78 ET is a high strength, industrial grade spray adhesive with an extended bond time of up to one hour. It is effective for bonding most types of insulation such as fibreglass and expanded polystyrene foam (EPS) onto numerous kinds of materials including plastics, metals, wood, paper substrates and more. Designed to be a high-solids, high-coverage formula designed for bonding many types of insulation. A lace spray pattern optimized for foam bonding helps bond expanded polystyrene foams (EPS) to themselves and other surfaces, including concrete.

3M™ Stainless Steel Cleaner and Polish 10097 is ideal for stainless steel, chrome, laminated plastics and aluminum surfaces. Its high-gloss formula wipes clean with no streaks or buildup, resists fingerprints and masks surface blemishes, and gives off a pleasant lime fragrance.

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes. With a 10:1 mix ratio, it features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Wood Refinisher's Tack Cloth 10132NA is a single-ply cloth measuring 17 inches by 36 inches, covering an area of 4.25 square feet. Packaged in cases of 48, this tack cloth is essential for preparing surfaces prior to the application of the first coat of stain, finish, or sealer, as well as for use between coats. It effectively removes dust, dirt, lint, and other particles from wood surfaces, ensuring a super-smooth finish without leaving any adhesive residue behind.

Scotch® Adhesive Applicator ATG-700 is a yellow adhesive applicator for use with Scotch® ATG Tape 1/2 inch or 3/4 inch wide rolls. Features covered gears that minimize applicator jams. The transparent cover shows remaining tape. and holds up to 60 yd (55m) of Scotch® ATG Tapes. This ATG adhesive transfer tape is a utility grade tape for use with Scotch® ATG Adhesive Applicators. The ATG tape system delivers a controlled application of the adhesive while the liner rewinds into the ATG applicator. It bonds on contact, and works on a variety of substrate or material combinations. The ATG tape system is convenient, quick and easy to use. There is no mess or clean up. It is a cost effective replacement to rivets, staples, screws, bolts, liquid adhesives, and is safer than hot melt adhesives.

Scotch® ATG Adhesive Transfer Tape 924 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. It is a general purpose adhesive transfer tape that is to be used with Scotch® ATG Adhesive Applicators and offers high adhesion, good solvent resistance, and excellent ultra-violet (UV) resistance. This tape system is convenient, quick, and easy to use. This product is an effective replacement to rivets, staples, screws, bolts, and liquid adhesives. Ideal for bonding a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.

Scotch® ATG Adhesive Transfer Tape 924 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. It is a general purpose adhesive transfer tape that is to be used with Scotch® ATG Adhesive Applicators and offers high adhesion, good solvent resistance, and excellent ultra-violet (UV) resistance. This tape system is convenient, quick, and easy to use. This product is an effective replacement to rivets, staples, screws, bolts, and liquid adhesives. Ideal for bonding a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.

Scotch® ATG Adhesive Transfer Tape 924 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. It is a general purpose adhesive transfer tape that is to be used with Scotch® ATG Adhesive Applicators and offers high adhesion, good solvent resistance, and excellent ultra-violet (UV) resistance. This tape system is convenient, quick, and easy to use. This product is an effective replacement to rivets, staples, screws, bolts, and liquid adhesives. Ideal for bonding a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.

Scotch® ATG Adhesive Transfer Tape 969 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. This tape is ideal for bonding materials with glossy coatings where an aggressive adhesive with high initial adhesion is desired. Some application ideas are: folders and boxes, attaching fabric swatches in sample books, and assembling point of purchase displays. This product features good adhesion to Low Surface Energy applications and high tack adhesive transfer tape.

Scotch® ATG Adhesive Transfer Tape 969 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. This tape is ideal for bonding materials with glossy coatings where an aggressive adhesive with high initial adhesion is desired. Some application ideas are: folders and boxes, attaching fabric swatches in sample books, and assembling point of purchase displays. This product features good adhesion to Low Surface Energy applications and high tack adhesive transfer tape.

3M™ Adhesive Transfer Tape 467MP provides outstanding adhesion to metal and high surface energy plastics. 200MP adhesive delivers excellent shear strength to resist slippage and edge lifting. It also performs well after exposure to humidity and hot/cold temperatures. A PCK layflat liner helps prevent curling and buckling in the liner. The tape is temporarily repositionable for placement accuracy. For applications such as splicing and laminating procedures using metals and HSE plastics.