Products tagged with '3M'

3M™ Tartan™ Filament Tape 8934 is constructed on a clear polypropylene backing, reinforced with glass yarn filaments, for strapping, bundling, and reinforcing applications. It has a tensile strength of 100 lbs/in (1751 N/cm) width and a pressure-sensitive synthetic rubber adhesive offers good shear strength to fibreboard, plastics, and most metal surfaces.

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD-1.5 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 1-1/2” (38.1 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD2 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to two inches (50.8 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD3 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS material. Can be used to firestop up to 3 inches (76.2 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Fire Barrier Ultra Plastic Pipe Device UPPD4 is a one-piece metal collar assembly encasing 3M's heat-expanding 3M™ Fire Barrier Wrap Strip Ultra GS Material. Can be used to firestop up to four inches (101.6 mm) of non-metallic pipe, cables and combos in new and retrofit installations. It achieves up to 3 hours of fire protection in tested and listed systems. This device also mounts easily and quickly (takes about 1 minute) when using 3M™ Ultra Fast Anchors and Pliers (requires 3 anchors, anchors sold separately), no power tools, mounting screws or other fasteners needed. It can also be anchored using conventional methods (e.g. toggle bolts for gypsum or masonry anchors for concrete).

3M™ Venture Tape Aluminum Foil Tape 1520CW is a nominal 1.8 mil foil backed tape that excels in a range of applications and environments including low temperatures. It is excellent for general-purpose heat shielding and light reflecting applications. Its aluminum foil backing is coated with a cold weather acrylic adhesive. The aluminum backing conforms around corners and to curved and irregular surfaces with ease and is an ideal choice for applications on both fibrous and sheet metal ductwork. The adhesive performs extremely well in demanding cold and hot temperature applications. With a service temperature ranging from -40°F/-40°C to 260°F/127°C, this tape can be applied in a variety of environmental conditions. Suitable for demanding applications in construction, aerospace, automotive, appliance, maintenance, repair and operations and many more segments.