Products tagged with '3M'

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes. With a 10:1 mix ratio, it features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

Scotch® Adhesive Applicator ATG-700 is a yellow adhesive applicator for use with Scotch® ATG Tape 1/2 inch or 3/4 inch wide rolls. Features covered gears that minimize applicator jams. The transparent cover shows remaining tape. and holds up to 60 yd (55m) of Scotch® ATG Tapes. This ATG adhesive transfer tape is a utility grade tape for use with Scotch® ATG Adhesive Applicators. The ATG tape system delivers a controlled application of the adhesive while the liner rewinds into the ATG applicator. It bonds on contact, and works on a variety of substrate or material combinations. The ATG tape system is convenient, quick and easy to use. There is no mess or clean up. It is a cost effective replacement to rivets, staples, screws, bolts, liquid adhesives, and is safer than hot melt adhesives.

Scotch® ATG Adhesive Transfer Tape 924 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. It is a general purpose adhesive transfer tape that is to be used with Scotch® ATG Adhesive Applicators and offers high adhesion, good solvent resistance, and excellent ultra-violet (UV) resistance. This tape system is convenient, quick, and easy to use. This product is an effective replacement to rivets, staples, screws, bolts, and liquid adhesives. Ideal for bonding a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.

Scotch® ATG Adhesive Transfer Tape 924 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. It is a general purpose adhesive transfer tape that is to be used with Scotch® ATG Adhesive Applicators and offers high adhesion, good solvent resistance, and excellent ultra-violet (UV) resistance. This tape system is convenient, quick, and easy to use. This product is an effective replacement to rivets, staples, screws, bolts, and liquid adhesives. Ideal for bonding a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.

Scotch® ATG Adhesive Transfer Tape 924 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. It is a general purpose adhesive transfer tape that is to be used with Scotch® ATG Adhesive Applicators and offers high adhesion, good solvent resistance, and excellent ultra-violet (UV) resistance. This tape system is convenient, quick, and easy to use. This product is an effective replacement to rivets, staples, screws, bolts, and liquid adhesives. Ideal for bonding a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.

Scotch® ATG Adhesive Transfer Tape 969 is an acrylic, reverse-wound, pressure-sensitive adhesive on a densified kraft paper liner. This tape is ideal for bonding materials with glossy coatings where an aggressive adhesive with high initial adhesion is desired. Some application ideas are: folders and boxes, attaching fabric swatches in sample books, and assembling point of purchase displays. This product features good adhesion to Low Surface Energy applications and high tack adhesive transfer tape.